Wall Lamp

Belluno Plug-in Wall Lamp

$308.00

SKU RDW-082609-01Made to order · built in limited runs

The piece

Plug-In Wall Lamp · Brass or Black Body · White Fabric Shade · 1 or 2 Heads · E26 / E27

A traditional wall sconce silhouette detailed with wavy relief work along the body — a decorative gesture that catches the light differently at different viewing angles and gives the fixture visual depth beyond its clean outline. The body is available in brass or black; the shade is white fabric on both versions, diffusing the E26 source into a soft, warm ambient glow suitable for bedside, entryway, and living room accent positions.

The Magdalene is a plug-in lamp — a 150 cm cord runs from the backplate to a standard wall outlet with no hardwiring required. Available in a single-head version (∅ 25 cm) and a wider two-head version (∅ 60 cm), both using the same 15 cm × 16 cm rectangular backplate.

Body Finish — Choose at Checkout

The shade is white fabric on both versions. Choose your body finish below.

Brass

Warm polished brass body against a white fabric shade — a classic combination. The wavy relief detail catches the light as a warm golden highlight. Suits traditional, transitional, and warm-neutral interiors.

Black

Matte black body with white shade — a graphic contrast. The wavy detail reads as textural shadow on the dark surface. Suits contemporary, Scandi, and neutral-palette interiors.

Size — Choose at Checkout

Single Head 1 Head — ∅ 25 cm

Diameter 25 cm ∅ 9.8″

Height 34 cm 13.4″

Bedside tables, hallways, and compact wall positions. Suited to single-lamp installations.

Double Head 2 Heads — ∅ 60 cm

Width 60 cm ∅ 23.6″

Height 42 cm 16.5″

Living room accent walls, entryways, and positions where a wider presence is needed. More output and visual mass than the single version.

Shared backplate (both sizes): D 15 cm × H 16 cm / ∅ 5.9″ × H 6.3″.

Plug-In Installation

⚡

Plug-In · 150 cm Cord · No Hardwiring

The Magdalene connects via a 150 cm / 59″ plug cord directly to a standard wall outlet — no junction box, no electrician, and no wiring work required. Mount the backplate to the wall at the desired height, run the cord discreetly along the wall or behind furniture to the nearest outlet. Ideal for rental spaces, bedrooms where a switched outlet is nearby, and any room without ceiling or wall wiring in the intended lamp position.

Bulbs are not included. Both versions use standard E26 (US) or E27 (international) sockets. A 6–10W LED at 2700K warm white with a frosted or opal glass diffuser is recommended — the warm tone works with both brass and black finishes, and the frosted diffuser avoids a visible hotspot through the white fabric shade.

Specifications

SKU	RDW-082609
Configurations	1-head · 2-head
Dimensions — 1H	∅ 25 × H 34 cm · ∅ 9.8″ × H 13.4″
Dimensions — 2H	∅ 60 × H 42 cm · ∅ 23.6″ × H 16.5″
Backplate	D 15 × H 16 cm · D 5.9″ × H 6.3″ (both sizes)
Body Finish	Brass · Black (choose at checkout)
Shade	White fabric (fixed, all finishes)
Materials	Brass lamp body with wavy relief detail · White fabric shade
Power Supply	Plug-in · 150 cm / 59″ cord · No hardwiring required
Socket	E26 / E27 · Bulbs not included · User-replaceable
Voltage	AC 110–240V · Universal
Mounting	Wall-mounted backplate · Plug-in cord
Best For	Bedrooms · Entryways · Living rooms · Rental spaces · Traditional and contemporary interiors

Downloads

↓ Spec Sheet

FAQ

Brass or Black — which suits my interior? +

Brass is the warmer and more classical option — the golden body reads as a warm highlight against the white shade, and the wavy relief catches the light as a subtle golden texture. It suits traditional, French country, transitional, and warm-neutral interiors. Black is the more contemporary choice — the dark body against the white shade creates a graphic, high-contrast silhouette, and the wavy detail reads as shadow and texture on the matte surface. It suits Scandi, minimalist, and neutral-palette interiors where brass would feel too warm.

1-head or 2-head — which suits my space? +

The 1-head (∅ 25 cm) is compact and suited to bedside positions, narrow hallways, and walls where a single understated accent is the intention. Two single lamps can also be installed symmetrically flanking a headboard or mirror. The 2-head (∅ 60 cm) provides more output and visual presence — suited to living room feature walls, entryways, and positions where a wider lamp is needed without installing two separate fixtures. Both versions use the same backplate and the same plug-in cord length.

How do I install a plug-in wall lamp? +

Mount the backplate to the wall at your preferred height using the supplied hardware (screws into a wall stud or an appropriate anchor for your wall type). The 150 cm cord then runs from the backplate to a nearby wall outlet. For the neatest appearance, run the cord vertically down the wall and tuck behind a bedside table or piece of furniture to conceal it. A cord cover (available at hardware stores) can be used to channel the cord flush against the wall for a cleaner finish. No electrical work is required.

Is it dimmable? +

Yes, when fitted with a dimmable LED bulb plugged into a switched outlet connected to a compatible TRIAC dimmer, or using an in-line cord dimmer switch (sold separately and attached between the cord and the outlet). Specify “dimmable” when purchasing the E26/E27 LED bulb. Dimming to 30–50% produces a soft, warm atmosphere well suited to bedside and living room use.

Care & delivery

Looking after it

Dust with a soft dry cloth. Stone, plated and painted finishes dislike solvents and abrasives, so keep both away from them; glass takes a lint-free cloth and a little glass cleaner. Solid brass is left unlacquered on most pieces and will warm and darken with handling, which is the material behaving as it should rather than a fault. Switch a fixture off and let it cool before cleaning it.

Who makes it

This piece is manufactured for Elio Marchetti by Radilum, our production partner for the collection.

We are a lighting house rather than a factory. We select the pieces, specify the finishes and the stone, and hold the relationship with the maker, and we would rather tell you that plainly than leave it unsaid. Questions about the manufacture of a specific fixture are welcome and we will answer them.

Delivery

Allow 28 to 43 business days from order to arrival, roughly six to nine weeks. Most of the collection is made to order, so that time covers the piece being built in the finish and size you chose, checked, packed and shipped. The same window applies wherever you are.

Shipping is free to Canada, the United States, the United Kingdom and Australia, with no minimum order.

Returns

You have ten days from receiving a piece to have it on its way back to us, under way inside those ten days rather than simply flagged with us on the tenth. Return postage on a change of mind is yours, there is no restocking fee, and the outcome is a refund to your original payment method rather than store credit. Made to order pieces return on the same terms as stock. Contact us before sending anything back.

Damaged or faulty on arrival

Separate from an ordinary return, and a longer window: twenty days from receipt to report it. Tell us before you send anything, keep the packaging until we have answered, and photographs of both the fault and the box help. Where a piece is faulty, damaged in transit or not what you ordered, we cover the return postage.

Installation

Any hardwired fixture should go in with a licensed electrician. Where a piece has particular requirements, a sloped ceiling, a chain that can be shortened, a specific socket, they are listed further up this page.

Shipping & returns in full Ask about this piece

The collection