Wall Lamp

Brinone Wall Lamp

$230.00

SKU RDW-114519-01Made to order · built in limited runs

The piece

Wall Lamp · Die-Cast Aluminum · Aluminum / Gold / Black · GU5.3 · Marine-Inspired

⚠ Installation Note — Read Before Ordering

This fixture is not compatible with standard US junction boxes (J-Box). It requires direct hardwiring by a licensed electrician using a dedicated wall mounting system. If you are in the US, consult a licensed electrician to confirm your wall installation method before purchasing this lamp.

The Brinone Wall Lamp is die-cast aluminum throughout — the body formed by forcing molten aluminum alloy into a precision mould under high pressure, producing a component that is denser, dimensionally tighter, and more heat-stable than sand-cast or stamped aluminum. The compact form — 8 cm deep and 14 cm tall — sits close to the wall and directs its GU5.3 light source with a focused, functional intention. The marine-inspired design lineage is present in the material choice and the restrained silhouette: raw, purposeful, without decorative excess.

Three finishes — natural aluminum, gold, and black — shift the fixture between the industrial and the refined, all on the same die-cast form. At 8 × 14 cm, the Brinone is a compact accent sconce — suited to corridors, bedroom walls, stairwells, and any position where a precise, low-profile point of wall light is needed rather than a broad ambient source.

Finish — Choose at Checkout

Aluminum

Natural die-cast aluminum — the raw material finish, cool and industrial. Suits minimalist, Bauhaus, and contemporary-industrial interiors.

Gold

Gold-toned aluminum — warmer, more refined. The marine form in a warm metallic reads as nautical-luxe. Suits eclectic, warm-neutral, and Art Deco interiors.

Black

Matte black aluminum — the most graphic and architectural. The compact form reads as a dark geometric accent. Suits contemporary, Scandi, and dark-palette interiors.

Dimensions

Depth (D) 8 cm 3.1″

Height (H) 14 cm 5.5″

GU5.3 socket — requires a 12V transformer. The GU5.3 (MR16) socket operates at 12V DC, not mains voltage. A compatible 12V LED driver or transformer must be installed in the circuit by your electrician — it is not supplied with the lamp. When specifying the installation to your electrician, confirm they will provide an appropriate 12V constant-voltage LED driver rated for the bulb wattage.

Bulbs: Use a GU5.3 MR16 12V LED capsule at 2700–3000K warm white, 5–8W. A narrow beam angle (24–36°) is recommended for focused wall accent or task light; a wider beam (60°) for softer ambient coverage from a small source.

Specifications

SKU	RDW-114519
Dimensions	D 8 × H 14 cm · D 3.1″ × H 5.5″
Finish Options	Aluminum · Gold · Black
Materials	Die-cast aluminum body
Socket	GU5.3 (MR16) · 12V DC · Requires external 12V LED driver
Voltage	12V DC (via external driver — not mains voltage)
Mounting	Direct hardwired · Not compatible with standard US J-Box · Licensed electrician required
Best For	Corridors · Bedrooms · Stairwells · Accent wall positions · Minimalist, industrial, and marine-inspired interiors

Downloads

↓ Spec Sheet

FAQ

Why is it not compatible with a US junction box? +

Standard US junction boxes (J-Box) are recessed into the wall or ceiling and have a standardised mounting system that US-market fixtures are designed to attach to. European and international fixtures like the Mast use different mounting hardware that does not interface with J-Box brackets. Your electrician will need to install a surface-mount or direct-wall attachment system appropriate to the lamp's backplate — this is a routine task for a licensed electrician familiar with international fixture installation. Contact us before ordering if you want to confirm compatibility with your specific wall construction.

Which finish suits my interior? +

Aluminum is the most industrial and raw — the natural die-cast surface reads as functional and material-honest. Best for minimalist, Bauhaus, and contemporary-industrial interiors where the lamp's purpose is visible and undecorated. Gold shifts the marine form toward the refined — a warm metallic on a compact, utilitarian shape reads as nautical-luxe and suits eclectic, warm-toned, and Art Deco interiors. Black is the most graphic — the compact form reads as a dark geometric accent against the wall, suiting contemporary, Scandi, and dark-palette interiors.

What is a GU5.3 socket and what bulb do I need? +

GU5.3 is the bi-pin base standard for MR16 reflector capsule bulbs — a compact low-voltage bulb widely used in recessed and track lighting. The Mast uses the GU5.3 at 12V DC, which means a 12V LED driver must be installed in the circuit (your electrician handles this). When purchasing bulbs, look for GU5.3 MR16 12V LED — not 240V mains GU5.3, which is a different product. Recommended: 5–8W at 2700–3000K warm white. Beam angle 24° for a focused wall accent; 36–60° for softer ambient coverage.

Is it dimmable? +

Yes, when the 12V LED driver installed by your electrician is a dimmable constant-voltage LED driver and the GU5.3 LED bulb is rated as dimmable — specify both conditions when briefing your electrician and when purchasing bulbs. The dimming is controlled at the driver level by a compatible wall dimmer or smart control (depending on the driver type). Confirm the full dimming specification with your electrician before installation.

Care & delivery

Looking after it

Dust with a soft dry cloth. Stone, plated and painted finishes dislike solvents and abrasives, so keep both away from them; glass takes a lint-free cloth and a little glass cleaner. Solid brass is left unlacquered on most pieces and will warm and darken with handling, which is the material behaving as it should rather than a fault. Switch a fixture off and let it cool before cleaning it.

Who makes it

This piece is manufactured for Elio Marchetti by Radilum, our production partner for the collection.

We are a lighting house rather than a factory. We select the pieces, specify the finishes and the stone, and hold the relationship with the maker, and we would rather tell you that plainly than leave it unsaid. Questions about the manufacture of a specific fixture are welcome and we will answer them.

Delivery

Allow 28 to 43 business days from order to arrival, roughly six to nine weeks. Most of the collection is made to order, so that time covers the piece being built in the finish and size you chose, checked, packed and shipped. The same window applies wherever you are.

Shipping is free to Canada, the United States, the United Kingdom and Australia, with no minimum order.

Returns

You have ten days from receiving a piece to have it on its way back to us, under way inside those ten days rather than simply flagged with us on the tenth. Return postage on a change of mind is yours, there is no restocking fee, and the outcome is a refund to your original payment method rather than store credit. Made to order pieces return on the same terms as stock. Contact us before sending anything back.

Damaged or faulty on arrival

Separate from an ordinary return, and a longer window: twenty days from receipt to report it. Tell us before you send anything, keep the packaging until we have answered, and photographs of both the fault and the box help. Where a piece is faulty, damaged in transit or not what you ordered, we cover the return postage.

Installation

Any hardwired fixture should go in with a licensed electrician. Where a piece has particular requirements, a sloped ceiling, a chain that can be shortened, a specific socket, they are listed further up this page.

Shipping & returns in full Ask about this piece

The collection