Commercial and bulk pricing available — EnquireFree shipping to Canada, the US, the UK and Australia. No minimum. New in the Alabaster Collection — Discover
Garzaro Signal Wall Lamp

Wall Lamp

Garzaro Signal Wall Lamp

$209.00

1 Size L 4.9″ x W 2.2″ x H 4.9″ (Pull cord switch)

2 Finishes Walnut color & Brass

3 Select Quantity Send 1 light fixture

SKU RDW-81016-01Made to order · built in limited runs
Ask about this piece →

The piece

Ash Wood · Brass Shade · Pull-Cord Switch

A compact wall lamp built around two honest materials — solid ash for the body, brass for the shade — and one honest gesture: a pull cord to turn it on and off. No touch panels, no apps, no hidden switches. Just the satisfying weight of cord in hand.

The Signal is thoughtful industrial design at its quietest. Small enough to live beside a bed, above a reading nook, or flanking a hallway mirror — and considered enough to sit comfortably in modern, mid-century, and traditional rooms alike.


See It In Action


AC 110V Only · Do Not Use 12V

This fixture uses G4 bi-pin AC 110V bulbs — it is not compatible with low-voltage 12V G4 bulbs. Using a 12V bulb will cause immediate failure or damage the fixture.

When shopping for replacement bulbs, confirm the packaging reads G4 / 110V AC — the bi-pin base looks identical across both voltages.


Shade Finish — Choose at Checkout


Brass

Warm brass shade. Classic pairing with natural ash wood body.


Silver

Brushed silver shade. Cooler contrast against the warm wood tone.


Walnut

Walnut-stained shade. Deeper, richer tone for darker palettes.

All three versions share the same solid ash wood body. Only the shade finish changes. Wood grain varies naturally between units — subtle differences in tone and pattern are part of the material's character.


Dimensions

L 12.5 cm L 4.9″ Length
W 5.5 cm W 2.2″ Width
H 12.5 cm H 4.9″ Height

Materials & Craft

◪

Solid Ash Body

Natural ash wood lamp body. Grain varies — each piece uniquely its own.

◉

Metal Shade

Hand-finished metal. Available in brass, silver, or walnut finish.

↓

Pull-Cord Switch

Tactile pull cord for intuitive on/off. No wall switch required.


Product Notes

G4 · 110V AC Bulb not incl.
Pull Cord On-lamp switch
Hardwired Wall installation
Dimensions L 12.5 × W 5.5 × H 12.5 cm / L 4.9″ × W 2.2″ × H 4.9″
Body material Solid Ash Wood
Shade material Metal
Shade finishes Brass · Silver · Walnut
Switch Pull-cord on lamp
Socket G4 Bi-Pin Base
Voltage AC 110V only
Bulb Sold separately — LED recommended
Wiring Hardwired
SKU RDW-81016

Service & Warranty

◇
Defective on Arrival

If your fixture arrives damaged or doesn't function, contact us within 30 days for replacement or refund — no disassembly required.

↻
Parts & Service

Pull cords, shade hardware, and wiring can be serviced. Contact us for replacement parts.

✉
Direct Support

Reach our team at com/pages/contact. We respond within 1 business day.


Installation

  • Hardwired wall installation — licensed electrician recommended.
  • Fits a standard single-gang wall box. All mounting hardware is included.
  • Use only G4 AC 110V bi-pin bulbs. Do not substitute with 12V low-voltage bulbs.
  • Pull cord controls on/off — a wall switch is optional, not required.
  • Do not disassemble the fixture body. If issues arise out of the box, contact us rather than opening the unit.
  • For indoor use only. Not rated for bathrooms or damp locations.

FAQ

Why can't I use a 12V G4 bulb? +

The G4 bi-pin base is physically identical in 12V and 110V versions, but the electrical systems are fundamentally different. This fixture is wired for direct 110V AC mains power — installing a 12V bulb will cause it to fail immediately or damage the fixture. Always confirm the bulb packaging reads G4 / 110V AC.

Which bulb do you recommend? +

A warm white (2700K) G4 AC 110V LED bulb at 2–3W gives the most flattering glow. LED is strongly preferred — it runs cool, lasts longer, and is safer in the compact brass shade. Avoid halogen G4 bulbs, which generate significant heat.

How does the pull cord work? +

A fabric pull cord extends from the lamp body. Pull once to turn on; pull again to turn off. Because the switch is on the lamp itself, you don't need a wall switch — the fixture can be wired directly to always-on power.

Is the lamp dimmable? +

The pull-cord switch is a simple on/off mechanism — it does not dim. For dimming, you would need to wire the fixture through a compatible wall dimmer and pair it with a dimmable G4 110V LED bulb. Contact us if you need guidance on dimmer compatibility.

Will the ash wood grain vary between units? +

Yes. Each lamp body is cut from solid ash, so grain pattern, color depth, and subtle tonal warmth differ between units. This natural variation is part of the material, not a defect.

Is the body solid wood or veneer? +

Solid ash wood — not a veneered or engineered substrate. The material has real weight and will age gracefully over time.

What if my fixture arrives defective? +

Contact us within 30 days of delivery with a brief description and photos. We arrange a replacement or full refund — you won't be asked to disassemble the fixture or troubleshoot at home. That's our job.


Downloads

↓ Spec Sheet ↓ Install Guide

Care & delivery

Looking after it

Dust with a soft dry cloth. Stone, plated and painted finishes dislike solvents and abrasives, so keep both away from them; glass takes a lint-free cloth and a little glass cleaner. Solid brass is left unlacquered on most pieces and will warm and darken with handling, which is the material behaving as it should rather than a fault. Switch a fixture off and let it cool before cleaning it.

Who makes it

This piece is manufactured for Elio Marchetti by Radilum, our production partner for the collection.

We are a lighting house rather than a factory. We select the pieces, specify the finishes and the stone, and hold the relationship with the maker, and we would rather tell you that plainly than leave it unsaid. Questions about the manufacture of a specific fixture are welcome and we will answer them.

Delivery

Allow 28 to 43 business days from order to arrival, roughly six to nine weeks. Most of the collection is made to order, so that time covers the piece being built in the finish and size you chose, checked, packed and shipped. The same window applies wherever you are.

Shipping is free to Canada, the United States, the United Kingdom and Australia, with no minimum order.

Returns

You have ten days from receiving a piece to have it on its way back to us, under way inside those ten days rather than simply flagged with us on the tenth. Return postage on a change of mind is yours, there is no restocking fee, and the outcome is a refund to your original payment method rather than store credit. Made to order pieces return on the same terms as stock. Contact us before sending anything back.

Damaged or faulty on arrival

Separate from an ordinary return, and a longer window: twenty days from receipt to report it. Tell us before you send anything, keep the packaging until we have answered, and photographs of both the fault and the box help. Where a piece is faulty, damaged in transit or not what you ordered, we cover the return postage.

Installation

Any hardwired fixture should go in with a licensed electrician. Where a piece has particular requirements, a sloped ceiling, a chain that can be shortened, a specific socket, they are listed further up this page.

Shipping & returns in full Ask about this piece

The collection

Brass

Fixtures in brass, from bright polished work to aged and unlacquered finishes that darken with handling.

Discover →

Similar products

Others in the same key