Commercial and bulk pricing available — EnquireFree shipping to Canada, the US, the UK and Australia. No minimum. New in the Alabaster Collection — Discover
Ormella Floor Lamp

Floor Lamp

Ormella Floor Lamp

$805.00

1 Size ∅ 19.7″ x ∅ 31.5″ x H 64.2″ (Trichromatic dimming)

2 Finishes Black

3 Plug options US plug

SKU RDF-175227-01Made to order · built in limited runs
Ask about this piece →

The piece

Floor Lamp · Gyroscopic Acrylic Disc · Edge-Lit LED · TRIAC Dimmable · Black or White

The Morrison is built around a single design insight: LED light directed into the edge of a flat translucent acrylic disc travels laterally through the material, causing the entire face of the disc to glow as one uniform, luminous surface. The disc appears solid white when unlit; when lit, it becomes a flat plane of even, diffused light — no visible source, no hotspot, no directionality within the disc itself.

The disc is mounted on a gyroscopic axis within the wrought iron frame, allowing it to be tilted to any angle — flat for ceiling-directed ambient light, angled for wall-wash, or anywhere between. The integrated LED is TRIAC-dimmable as standard, controllable from full output down to a soft residual glow. Two sizes and two finishes — Black or White — share the same mechanism and 80 cm base diameter.

Key Features

◯

Edge-Lit Disc

LED enters through the disc edge — the full face glows as a uniform white plane with no visible source.

⟳

Gyroscopic Tilt

Disc pivots freely on its axis — direct light at the ceiling, wall, or any angle in between.

◑

TRIAC Dimmable

Built-in dimming as standard — compatible with TRIAC wall dimmers, no special driver required.

Finish — Choose at Checkout

Black

Matte black wrought iron frame — the glowing white disc reads as a luminous object floating within a dark structural geometry. Suits contemporary and minimalist interiors.

White

White wrought iron frame — the disc and frame read as a continuous tonal composition when unlit, with the luminous disc emerging cleanly when switched on. Suits light, Scandi, and all-white interiors.

Size — Choose at Checkout

Small ∅ 50 cm Disc
Disc ∅ 50 cm / ∅ 19.7″
Base ∅ 80 cm / ∅ 31.5″
Height 163 cm / 64.2″

Standard living rooms and bedrooms. The 50 cm disc provides generous ambient coverage for spaces up to approximately 20 m².

Large ∅ 70 cm Disc
Disc ∅ 70 cm / ∅ 27.6″
Base ∅ 80 cm / ∅ 31.5″
Height 168 cm / 66.1″

Open-plan spaces, larger living rooms, and positions where the lamp is the primary light source or a strong visual anchor.

TRIAC dimming — included as standard. The Morrison ships with a TRIAC-compatible integrated LED driver. Connect to any standard TRIAC wall dimmer switch (sold separately — confirm it is rated for LED loads) to dim from full output to a residual soft glow. No additional driver or smart switch is required. The plug-in cord also works with an in-line cord dimmer as an alternative.

Plug-in — no hardwiring required. The 150 cm / 59″ cord connects to a standard wall outlet. Position freely near any outlet.

Specifications

SKU RDF-175227
Sizes Small: ∅50 disc · ∅80 base · H163 cm · Large: ∅70 disc · ∅80 base · H168 cm
Finish Options Black · White
Disc Translucent white acrylic · Edge-lit · Gyroscopic axis mount
Frame Wrought iron
Light Source Integrated LED · Non-replaceable · Built-in TRIAC dimming
Dimming TRIAC-compatible · Standard wall dimmer or in-line cord dimmer
Power Supply Plug-in · 150 cm / 59″ cord
Voltage AC 110–240V · Universal
Best For Living rooms · Bedrooms · Studios · Minimalist and contemporary interiors

Downloads

↓ Spec Sheet

FAQ

How does edge-lighting work? +

An LED strip is positioned along the rim of the acrylic disc — not on its face. Light enters the disc laterally through the edge and undergoes total internal reflection, bouncing repeatedly through the material until it reaches the disc surface. The surface is treated with micro-etching or diffusion particles that scatter the light outward uniformly. The result is a disc that glows evenly across its entire face from a single edge-mounted source — no hotspot at the LED position, no visible source, just a flat plane of diffused light.

How far can the disc tilt? +

The gyroscopic mounting allows the disc to tilt freely through a wide range — from fully horizontal (disc face directed at the ceiling for broad uplighting) to nearly vertical (disc face directed at a wall for a wall-wash effect). The most common position is a moderate upward tilt that blends ambient ceiling light with indirect side diffusion. The disc can be set to any angle manually and holds position once adjusted.

Small or Large — which suits my space? +

The Small (∅ 50 cm) suits standard-size living rooms and bedrooms as a primary or secondary floor lamp. At 50 cm the disc is visually substantial without dominating the room. The Large (∅ 70 cm) is for spaces where the lamp is the main ambient light source or where it is intended as a strong visual anchor — open-plan areas, large living rooms, and rooms with high ceilings. Both versions are the same height (roughly 163–168 cm) and share the same 80 cm base diameter.

What dimmer switch is compatible? +

Any standard TRIAC LED dimmer switch rated for the lamp's wattage (check the spec sheet for exact wattage). Look for a wall dimmer labeled “LED compatible” or “trailing edge” — avoid older incandescent-only dimmers which will cause flickering. Alternatively, a plug-in in-line cord dimmer (with a rotary or slider control on the cord itself) can be used between the lamp's plug and the wall outlet, requiring no wall switch modification at all.

Care & delivery

Looking after it

Dust with a soft dry cloth. Stone, plated and painted finishes dislike solvents and abrasives, so keep both away from them; glass takes a lint-free cloth and a little glass cleaner. Solid brass is left unlacquered on most pieces and will warm and darken with handling, which is the material behaving as it should rather than a fault. Switch a fixture off and let it cool before cleaning it.

Who makes it

This piece is manufactured for Elio Marchetti by Radilum, our production partner for the collection.

We are a lighting house rather than a factory. We select the pieces, specify the finishes and the stone, and hold the relationship with the maker, and we would rather tell you that plainly than leave it unsaid. Questions about the manufacture of a specific fixture are welcome and we will answer them.

Delivery

Allow 28 to 43 business days from order to arrival, roughly six to nine weeks. Most of the collection is made to order, so that time covers the piece being built in the finish and size you chose, checked, packed and shipped. The same window applies wherever you are.

Shipping is free to Canada, the United States, the United Kingdom and Australia, with no minimum order.

Returns

You have ten days from receiving a piece to have it on its way back to us, under way inside those ten days rather than simply flagged with us on the tenth. Return postage on a change of mind is yours, there is no restocking fee, and the outcome is a refund to your original payment method rather than store credit. Made to order pieces return on the same terms as stock. Contact us before sending anything back.

Damaged or faulty on arrival

Separate from an ordinary return, and a longer window: twenty days from receipt to report it. Tell us before you send anything, keep the packaging until we have answered, and photographs of both the fault and the box help. Where a piece is faulty, damaged in transit or not what you ordered, we cover the return postage.

Installation

Any hardwired fixture should go in with a licensed electrician. Where a piece has particular requirements, a sloped ceiling, a chain that can be shortened, a specific socket, they are listed further up this page.

Shipping & returns in full Ask about this piece

The collection

Floor Lamps

Floor lamps and arc lights — reading lamps, task lighting and sculptural standing fixtures for living rooms and studies.

Discover →

Similar products

Others in the same key