Pomparo Wall Light

The piece

Solid Brass · Lost-Wax Cast · 18th-Century Rococo

Hand-cast in solid brass using the traditional lost-wax method. Each piece is unique — the depth of relief and warm metallic glow cannot be replicated by machine.

See It In Action

Product overview

Styled interior showcase

Materials & Craft

⚗

Lost-Wax Brass

Each piece individually cast — no two are identical. Patina deepens naturally with age.

◉

Hand-Finished

Relief detail hand-chased and polished after casting.

✦

E12 / E14 Socket

Candelabra base · accepts incandescent or dimmable LED · bulb not included.

Configuration — Choose at Checkout

2-Arm Version

L 21.5 × W 12 × H 50 cm

L 8.5″ × W 4.7″ × H 19.7″

3-Arm Version

L 36 × W 12 × H 72 cm

L 14.2″ × W 4.7″ × H 28.3″

What to Know Before You Install

⚑ Important — Read before purchasing

1

The brass finish looks different under different lighting

Solid brass is naturally more reflective than studio photography shows. Under real indoor or natural light, the finish is brighter and more vivid than product photos convey. This is a property of the material, not a colour discrepancy. Watch the video above to see the fixture under real lighting before ordering.

2

Wiring runs along the back of the fixture — not inside a channel

The body is a single solid cast — there is no hollow channel for internal wiring. The cord runs along the back surface between wall plate and arms. If installing against a mirror or reflective surface, rear wiring will be visible. Plan a wire cover or in-wall conduit before installation.

3

Not suitable for damp or outdoor locations

Dry indoor use only. Not for bathrooms or damp locations.

Product Notes

E12 / E14 Socket · bulb not incl.

Solid Brass Lost-wax cast

Hardwired Wall installation

Dimensions	2-arm: L 21.5 × W 12 × H 50 cm / L 8.5″ × W 4.7″ × H 19.7″ 3-arm: L 36 × W 12 × H 72 cm / L 14.2″ × W 4.7″ × H 28.3″
Body material	Solid Brass — individually hand-cast, lost-wax method
Finish	Brass Black Brass Natural brass develops a warmer patina over time — this is a feature, not a flaw.
Socket type	E12 or E14 Candelabra Base
Bulb included	No — sold separately
Dimmable	Yes — with dimmable bulb + compatible dimmer switch
Wiring	Hardwired · rear-surface cord routing (see note above)
Style	18th-Century Rococo · French Baroque
SKU	RDW-101128

Bulb not included. E12 or E14 candelabra base. For dimming, use a dimmable LED (2700K recommended) with a TRIAC dimmer. Avoid cool-white bulbs.

Installation

Hardwired installation — a licensed electrician is strongly recommended.
Fits a standard single-gang electrical box. All mounting hardware included.
Cord routes along the back of the fixture — plan wire concealment if mounting against mirrors or reflective walls.
For smooth dimming, pair with a dimmable LED bulb and a TRIAC dimmer switch (e.g. Lutron Skylark, Leviton Decora).
Indoor dry location only. Not suitable for bathrooms or damp areas.

FAQ

Why does the brass look brighter in person than in the photos? +

Studio photography uses cool-spectrum lighting that reduces glare. Real solid brass is more reflective — under natural or warm indoor light it glows vividly. This is a material property, not a colour discrepancy. Watch the product video above before ordering.

Can the wiring be hidden or run inside the fixture? +

No. The body is a single solid cast — there is no channel for internal wiring. The cord runs along the back surface. For mirror or reflective wall installations, plan an in-wall conduit or wire cover with your electrician before fitting.

What is the lost-wax casting method? +

A wax model is encased in ceramic, then melted out — leaving a cavity that is filled with molten brass. Each cast is unique and cannot be replicated by machine, giving the fixture its exceptional relief detail.

Will the finish change over time? +

Yes. Natural brass develops a living patina — deeper tones in high-contact areas, original lustre in protected areas. Clean with a dry cloth to slow patina, or apply a thin clear lacquer to preserve as-received appearance.

Which bulb do you recommend? +

Warm white (2700K) dimmable LED, 4–6W, E12 or E14 base. A flame-tip style complements the candle aesthetic. Avoid cool-white — it flattens the brass tone.

Is this suitable for a mirror wall installation? +

Yes, but rear wiring will reflect in the mirror if exposed. Route wiring inside the wall via conduit and use a flush wall plate. Consult your electrician before fitting.

Downloads

↓ Spec Sheet ↓ Install Guide

Care & delivery

Looking after it

Dust with a soft dry cloth. Stone, plated and painted finishes dislike solvents and abrasives, so keep both away from them; glass takes a lint-free cloth and a little glass cleaner. Solid brass is left unlacquered on most pieces and will warm and darken with handling, which is the material behaving as it should rather than a fault. Switch a fixture off and let it cool before cleaning it.

Who makes it

This piece is manufactured for Elio Marchetti by Radilum, our production partner for the collection.

We are a lighting house rather than a factory. We select the pieces, specify the finishes and the stone, and hold the relationship with the maker, and we would rather tell you that plainly than leave it unsaid. Questions about the manufacture of a specific fixture are welcome and we will answer them.

Delivery

Allow 28 to 43 business days from order to arrival, roughly six to nine weeks. Most of the collection is made to order, so that time covers the piece being built in the finish and size you chose, checked, packed and shipped. The same window applies wherever you are.

Shipping is free to Canada, the United States, the United Kingdom and Australia, with no minimum order.

Returns

You have ten days from receiving a piece to have it on its way back to us, under way inside those ten days rather than simply flagged with us on the tenth. Return postage on a change of mind is yours, there is no restocking fee, and the outcome is a refund to your original payment method rather than store credit. Made to order pieces return on the same terms as stock. Contact us before sending anything back.

Damaged or faulty on arrival

Separate from an ordinary return, and a longer window: twenty days from receipt to report it. Tell us before you send anything, keep the packaging until we have answered, and photographs of both the fault and the box help. Where a piece is faulty, damaged in transit or not what you ordered, we cover the return postage.

Installation

Any hardwired fixture should go in with a licensed electrician. Where a piece has particular requirements, a sloped ceiling, a chain that can be shortened, a specific socket, they are listed further up this page.

Shipping & returns in full Ask about this piece

The collection