Pendant Lamp
The piece
Natural Alabaster · Solid Brass · Integrated LED
Inspired by the enduring elegance of alabaster, this pendant showcases the stone's captivating translucency. Light gracefully filters through a hand-cut block of natural alabaster — emitting a refined, otherworldly radiance. Each piece features unique natural veining, so every pendant is one-of-a-kind.
Please note: The default shipment version features a 360-degree rotating universal head.
See It In Action
Product overview
Body Finish — Choose at Checkout
Brass
Warm solid brass canopy and rod — classic, golden, naturally pairs with alabaster.
Black
Matte black canopy and rod — architectural, modern, maximum contrast.
Sizes — Choose at Checkout
Small
∅ 10 × H 20 cm
∅ 3.9″ × H 7.9″
~15 W · LED
Medium
∅ 12 × H 24 cm
∅ 4.7″ × H 9.4″
~20 W · LED
Large
∅ 15 × H 30 cm
∅ 5.9″ × H 11.8″
~25 W · LED
Materials & Craft
Natural Alabaster
Single hand-cut block of natural alabaster — each piece uniquely veined and translucent.
Solid Brass
Brass canopy and suspension rod. Available in raw brass or matte black finish.
Integrated LED
Built-in warm-white LED — long life, no bulb replacement needed.
Product Notes
Integrated LED No bulb required
19.7″ Rod Suspension · adjustable
Hardwired Ceiling installation
| Dimensions | Small: ∅ 10 × H 20 cm / ∅ 3.9″ × H 7.9″ Medium: ∅ 12 × H 24 cm / ∅ 4.7″ × H 9.4″ Large: ∅ 15 × H 30 cm / ∅ 5.9″ × H 11.8″ |
| Wattage | Small ~15 W · Medium ~20 W · Large ~25 W |
| Suspension rod | 19.7″ (50 cm) |
| Body material | Solid Brass with Alabaster accent |
| Body finish | Brass or Black (choose at checkout) |
| Shade material | White Natural Alabaster (each piece unique) |
| Light source | Integrated LED — warm white (2700 K) |
| Bulb included | Not applicable — built-in LED |
| Dimmable | Yes — with compatible TRIAC dimmer switch |
| Wiring | Hardwired to ceiling |
| SKU | RDP-190211 |
Integrated LED. This pendant uses a built-in warm-white LED — no bulb is required, and none can be replaced by the user. For dimming, pair with a TRIAC-compatible wall dimmer. Each alabaster shade is cut from natural stone, so veining and pattern will vary subtly from the product photos — this is part of the material's inherent beauty, not a defect.
Installation
- Hardwired ceiling installation — a licensed electrician is recommended.
- Fits a standard ceiling electrical box. All mounting hardware is included.
- The 19.7″ suspension rod can be shortened on site by a qualified electrician to suit lower ceilings.
- Dimmable when paired with a TRIAC-compatible dimmer switch (e.g. Lutron Skylark, Leviton Decora).
FAQ
Why does each pendant look different from the photos? +
Alabaster is a natural stone, and no two blocks share the same veining, texture, or translucency. Our photos represent a typical example — your pendant will have its own unique pattern, which is part of the material's inherent beauty.
Is the LED replaceable? +
The LED module is integrated and not user-replaceable. It is rated for very long life under normal use (typically 25,000+ hours). If replacement ever becomes necessary, it should be handled by a qualified electrician.
Is the pendant dimmable? +
Yes. Pair it with a TRIAC-compatible wall dimmer (e.g. Lutron Skylark, Leviton Decora) to adjust brightness. With a standard switch, it operates at full brightness.
What colour is the LED light? +
Warm white, approximately 2700 K. This temperature brings out the natural warmth of the alabaster and produces a soft, golden glow — ideal for dining areas and living spaces.
Can I cluster multiple pendants together? +
Yes — the pendant looks striking clustered at varied heights over a dining table, kitchen island, or stairwell. You can mix sizes and finishes for a layered look. Each pendant requires its own ceiling junction box.
Can the suspension rod be shortened? +
The 19.7″ (50 cm) rod can typically be shortened on site by a qualified electrician to suit lower ceilings. Installation instructions for the rod are included.
How do I care for the alabaster shade? +
Dust gently with a soft, dry cloth. Avoid water, solvents, and abrasive cleaners — alabaster is softer than marble and can absorb liquid or etch. The stone does not require waxing or re-sealing.
Downloads
